1. 安全操作：在進行安裝之前，確保所有相關人員都已經了解和熟悉設備的安裝操作要求，并佩戴適當?shù)姆雷o裝備，如安全帽、手套、安全鞋等。

1. Safe operation: Before installation, ensure that all relevant personnel have understood and familiarized themselves with the installation requirements of the equipment, and wear appropriate protective equipment, such as helmets, gloves, safety shoes, etc.

2. 設備定位：選擇合適的安裝位置，確保設備的穩定性和可靠性?？紤]設備的尺寸、重量和運行時的振動，并保證設備有足夠的空間用于安全操作和維修。

2. Equipment positioning: Choose a suitable installation location to ensure the stability and reliability of the equipment. Consider the size, weight, and vibration of the equipment during operation, and ensure that there is sufficient space for safe operation and maintenance.

3. 基礎支撐：對設備進行適當?shù)幕A(chǔ)支撐，如基礎墊板、螺栓固定等。確保設備在運行時不會發生移動或晃動，同時確保設備與地面保持一定的距離，以便進行維護和清理。

3. Basic support: Provide appropriate basic support for the equipment, such as foundation pads, bolt fixation, etc. Ensure that the equipment does not move or shake during operation, and maintain a certain distance from the ground for maintenance and cleaning.

4. 輸送系統安裝：安裝網帶輸送系統時，確保網帶正確安裝并調整張力。檢查導向滾筒、托輥、鏈條和機械連接件的安裝質量和準確性。

4. Installation of conveyor system: When installing the mesh belt conveyor system, ensure that the mesh belt is installed correctly and adjust the tension. Check the installation quality and accuracy of guide rollers, idlers, chains, and mechanical connectors.

5. 電氣連接：進行設備的電氣連接時，確保符合相關的安全標準和規范。檢查電氣線路和接線盒的連接是否牢固，并確保接地線與設備良好連接。

5. Electrical connection: When making electrical connections to equipment, ensure compliance with relevant safety standards and regulations. Check if the electrical wiring and junction box connections are secure, and ensure that the grounding wire is well connected to the equipment.

6. 潤滑系統：對設備的潤滑系統進行正確的安裝和調試，確保潤滑油路通暢，并檢查潤滑油的供給是否正常。

6. Lubrication system: Install and debug the lubrication system of the equipment correctly, ensure smooth lubrication oil circuit, and check whether the supply of lubricating oil is normal.

7. 安裝調試：在設備安裝完成后，進行初步的安裝調試，檢查設備的各項功能是否正常，如傳動系統、進出料系統、清理系統等。

7. Installation and debugging: After the equipment installation is completed, preliminary installation and debugging are carried out to check whether the various functions of the equipment are normal, such as the transmission system, inlet and outlet system, cleaning system, etc.

上一篇：涂裝生產線設備結構特點介紹
下一篇：沸石轉輪中VOCs殘留的處理