1、吸氣臂捕獲方法

1. Aspiration arm capture method

吸氣臂的框架類似人的胳膊，根據減振桿和磨擦片的功效，吸氣胳膊可以在吸氣臂長短范疇內的室內空間內懸浮。在吸氣罩的位子上設計方案了與眾不同的轉動組織，確保了吸氣罩可以根據隨意方向指向電焊焊接部位。吸氣罩根據液體設計方案和氣旋仿真模擬，使吸氣臂可以很多和較大區域的捕獲電焊焊接操作過程中形成的粉塵。

The framework of the inhalation arm is similar to that of a human arm. Based on the effectiveness of the shock absorber and friction plate, the inhalation arm can be suspended in the indoor space within the range of the length of the inhalation arm. A unique rotating structure has been designed on the position of the suction hood, ensuring that the suction hood can point towards the welding area in any direction. According to the liquid design scheme and cyclone simulation, the suction hood allows the suction arm to capture dust formed during welding operations in many and large areas.

吸氣臂的表層為耐熱的塑料軟管，直徑為φ140-160，里襯剛絲。一方面可以避免火苗濺出燒傷塑料軟管，與此同時塑料軟管構造又確保了吸氣臂的挪動靈便，不被負壓力吸扁。每根吸氣臂的設計方案總流量通常為1,200m3/h，吸氣罩坐落于電焊焊接部位上邊的250-300mm高。

The surface of the suction arm is a heat-resistant plastic hose with a diameter of φ 140-160, lined with steel wire. On the one hand, it can prevent flames from splashing out and burning the plastic hose, while at the same time, the structure of the plastic hose ensures the flexible movement of the suction arm, which is not flattened by negative pressure. The total flow rate of each suction arm design scheme is usually 1200m3/h, and the suction hood is located 250-300mm high above the welding area.

吸氣臂的安裝，務必安裝在墻面上或是是在路面上安裝支撐柱的方式。

The installation of the suction arm must be done on the wall or on the road by installing support columns.

應用領域：

Application field:

吸氣臂的吸風機規格為φ150-170，合適解決焊接長短不超過100mm的電焊焊接，職工電焊焊接部位固定不動的狀況。焊接工藝合適手工電弧焊、CO2氣體保護焊、MAG焊、MIG焊。

The specifications of the suction fan for the suction arm are φ 150-170, suitable for solving the welding problem of welding with a length not exceeding 100mm, and the fixed position of the welding part for employees. The welding process is suitable for manual arc welding, CO2 gas shielded welding, MAG welding, and MIG welding.

2、頂吸罩

2. Top suction hood

頂吸罩為了更好地可以徹底捕獲在一個工位上形成的隨意煙塵，其規格為設計方案成遮蓋產品工件全部的電焊焊接部位，頂吸罩的外觀為四凌臺形，每一面與路面的交角不小于45°，為了防止橫著氣旋的影響，通常會在吸氣罩的側面掛檔弧簾。

In order to better capture the random smoke and dust formed on a workstation, the specifications of the top suction hood are designed to cover all the welding parts of the product workpiece. The appearance of the top suction hood is a four sided platform shape, and the intersection angle between each side and the road surface is not less than 45 °. To prevent the influence of horizontal cyclones, a gear arc curtain is usually hung on the side of the suction hood.

頂吸罩適用電焊焊接部位固定不動，電焊焊接部位較多的狀況，職工可以在吸氣罩遮蓋的范疇內隨意的電焊焊接，造成的有機廢氣都可以成功的捕獲，做到很高的捕獲高效率。

The top suction hood is suitable for fixed welding positions. In situations where there are many welding positions, employees can freely weld within the scope covered by the suction hood, and the organic waste gas generated can be successfully captured, achieving high capture efficiency.

3、頂吸板

3. Top suction plate

頂吸板的捕獲基本原理類似頂吸罩，二者的差異取決于，頂吸板為單面構造，選用了氣旋模擬仿真軟件詳盡的仿真模擬了其自然通風全過程，選用環形吸水口的構造，改頂吸罩的雙層構造為單面構造，合理的降低了頂吸罩的凈重，降低了頂吸罩的工作壓力損害，與此同時頂吸板的外表也遠超頂吸罩。

The basic principle of capturing the top suction plate is similar to that of the top suction cover. The difference between the two depends on the fact that the top suction plate is a single-sided structure, and a cyclone simulation software was used to simulate the entire natural ventilation process in detail. The circular suction port structure was selected, and the double-layer structure of the top suction cover was changed to a single-sided structure, which reasonably reduces the net weight of the top suction cover and reduces the working pressure damage of the top suction cover. At the same time, the appearance of the top suction plate is far superior to the top suction cover.

依據當場工位是多少及布局狀況可采用挪動單機版凈化和多工位集中化凈化系統軟件。多工位集中化凈化：每一個工焊煙根據焊煙捕獲設備（吸氣臂、頂吸罩、頂吸板等）捕獲后，通過通風風管送進凈化服務器，煙塵經凈化后排進空氣。

According to the number of workstations on site and the layout status, mobile single machine version purification and multi workstation centralized purification system software can be used. Multi station centralized purification: After each welding smoke is captured by welding smoke capture equipment (suction arm, top suction hood, top suction plate, etc.), it is sent to the purification server through ventilation ducts, and the smoke and dust are purified before entering the air.

電焊焊接凈化核心一般均采用集中化凈化系統軟件，其工位布局比標準齊整，每一個工位中間選用裝修隔斷分隔，工位焊煙根據一定長短的吸氣臂，采用負壓力消化吸收方法，有機廢氣根據吸氣臂、管道大小頭等，終經濾筒凈化器凈化后高處排出。這類方法從根源上立即抽走有危害電焊焊接濃煙，進而做到維護實際操作員工的目地。

The purification core of electric welding generally adopts centralized purification system software, and its workstation layout is more neat than the standard. Each workstation is separated by decoration partitions in the middle. The welding smoke at the workstation is digested and absorbed under negative pressure based on a certain length of suction arm. Organic waste gas is purified by filter cartridge purifiers and discharged from high places according to the suction arm, pipeline size, etc. This type of method immediately removes harmful welding smoke from the root, thereby achieving the goal of maintaining the actual operation of employees.

焊煙除塵器設備又叫集中型焊煙凈化系統軟件是一套通用性焊煙凈化系統軟件，適用工位較多的生產加工生產制造工作狀況。集中型焊煙凈化系統軟件應用性強，達到絕大多數工作狀況的焊煙凈化要求，構造美觀大方，節省室內空間。

Welding smoke dust collector equipment, also known as centralized welding smoke purification system software, is a universal welding smoke purification system software that is suitable for production, processing, and manufacturing work with multiple workstations. The centralized welding smoke purification system software has strong applicability, meeting the welding smoke purification requirements of the vast majority of working conditions, with a beautiful and elegant structure, and saving indoor space.

電焊焊接集中化粉塵凈化系統軟件由吸塵風機、凈化服務器、自動控制系統、除塵管道、凈化零配件、除塵實際操作部件組成。

The centralized dust purification system software for electric welding consists of a suction fan, a purification server, an automatic control system, dust removal pipelines, purification spare parts, and actual dust removal operating components.

吸塵風機和凈化服務器依據顧客車間當場自然環境而定，實際包含除塵管道管道通徑、管路長短；系統軟件是多少總數與此同時實際操作；所吸原材料目標物理學、有機化學特性；服務器和系統軟件所處自然環境等各種要素。

The vacuum cleaner and purification server are determined based on the natural environment of the customer's workshop on site, including the actual diameter and length of the dust removal pipeline; What is the total number of system software and the actual operation at the same time; The target physical and organic chemical properties of the absorbed raw materials; Various factors such as the natural environment in which servers and system software are located.

本文由多工位焊煙除塵設備提供技術支持，更多的詳細精彩內容請點擊我們的網站http://www.hbrqhj.com我們將會全心全意為您提供滿意的服務。

This article is supported by multi station welding smoke and dust removal equipment. For more detailed and exciting content, please click on our website http://www.hbrqhj.com We will wholeheartedly provide you with satisfactory service.

上一篇：機器人自動噴涂線與傳統涂層的區別
下一篇：整體移動噴漆房溫濕度控制介紹